Solve If your Mac Screen Keeps Going Black?

Mac screen keeps going black is one of the general issues that most of the Mac users face and it is indeed quite frustrating. This issue appears when the system battery is running out. If you are a Mac user and facing a similar issue, then this article will help you. Here, you will get all the possible procedures to get rid of this particular problem. After performing all the procedures you can quickly resolve this issue on the Mac system.

Possible Reasons Behind the Mac Screen keeps going Black

Now, we have listed some of the common reasons for the Mac screen keeps going black problem.

Battery Drain

Battery drain is one of the common causes of this issue. If your Mac device is connected but the battery is not charging, then it could be due to a fault in the battery cord. This will subsequently result in Mac showcasing a black screen and freezing unexpectedly.

Display Problem

Most of the cases, the MacBook becomes black at startup. However, the activity indicator, fan, or startup sound will continue to function, indicating that the computer is on. So, it looks like a Mac screen difficulty.

Wrong Disk Permissions

Sometimes, this issue appears when the disk permissions are inaccurate. Because, if you set incorrect permissions, then you can see that the Mac pro screen goes black.

Glitches in any Third-Party Apps

The glitch in any third-party apps can cause this issue on the Mac system. If you are using any third-party apps or recently installed an app on the system, then this problem may occur on your Mac device.

Now, let us proceed to the methods for solving Mac screen keeps going black problem.

Procedures to get rid of Mac Screen keeps going Black Problem

We are going to share different and effective procedures that can help you to eliminate the Mac screen keeps going black issue. Let’s have a look at the given below:

Procedure 1 – Turn Off the Energy Server

This is one of the most reliable procedures to resolve the problem when the Mac pro screen goes black. If the energy server is turned On, then you may see this issue on the system. So, you need to disable the energy server. To do so follow the steps mentioned below:

Step 1

At first, you have to go to the Apple logo which is present at the top left side corner. From that menu list, you will get an option ‘System Preferences’ select it.

Step 2

In the System Preferences window, you can see the Energy Server tab, select it. From the Energy Server section, you need to navigate to the Power Adapter section.

Step 3

In the Power Adapter window, unmark everything. Then, set the ‘Computer and Display sleep’ to  ‘Never’. After doing this again follow the same procedure for the Battery section.

Procedure 2 – Force Restart

When you see this issue on your Mac device, you need to force restart the device. So, at first, you have to hold and click on the Power key at least 5 seconds, until the Mac system shut down perfectly.  After shutting down the system, you need to wait for at least 10 seconds and again turn it On by pressing the Power button. After doing this you can check whether the Mac system perfectly works without any issue.

Procedure 3 – Check the Mac’s Battery

This is another easy procedure that can help you to fix the Mac screen keeps going black issue. When this issue appears you must check whether Mac’s battery is in working condition or not. To complete this procedure follow the steps given below:

Step 1

At first, you have to click on the Apple icon to open the Menu list. From that list, you can see an option ‘About this Mac’, select it.

Step 2

In the ‘About Mac’ window, you need to click on the System Report, and then select the Power from the left side panel.

Step 3

On the left side panel, you have to check whether the battery status. Verify your Mac’s battery Cycle count and condition. If the status report is negative, then you need to replace it with a new battery.

Procedure 4 – Reset NVRAM Settings

If the above-mentioned procedures do not help you, then you need to try this procedure to eliminate this issue on the Mac system. NVRAM is the full form is Non-Volatile RAM. This is the functionality that helps in memory improvements for displays, startup disk, speakers, etc. Reset the NVRAM and it will turn the device to the factory position. If you do not know how you can do that, then follow the under mentioned steps:

Step 1

Firstly, you need to switch Off the Mac system by pressing the Power button for at least five seconds. When it is turned Off, then again keep pressing the Power button to boot up your device.

Step 2

When you hear the first startup sound, hold and press the COMMAND + OPTION + P + R buttons on the keyboard. Continue holding these buttons till you listen to another startup sound. After doing this release all these buttons and check if the Mac system opens without any problem.

Procedure 5 – Update the Mac Operating System

If you have not updated the Mac OS, then you may face Mac screen keeps going black issue. So, you must keep the system is updated. To do this:

Step 1

Firstly, you have to open the Apple menu list by pressing the Apple logo. In that list, you will get an option System Preferences tab, click on it.

Step 2

From the System Preferences section, you should click on the Software Update tab, to check for the updates. If any updates show on the screen, then click on the Update button. Now, you should see the update process has begun. Once it is done, restart the system, and then check whether the issue is resolved or not.

Procedure 6 – Reset the System Management Controller

With the help of the System Management Controller, you can easily solve the display problem on your Mac device. Follow the steps cited below:

Step 1

In the beginning, you need to launch the Apple menu list by pressing the Apple logo. Under the menu list, select the Shut Down option to switch Off your Mac device.

Step 2

When your device is Off, you need to hold and press the Shift + Control + Option buttons and at the same time, you need to press the Power button from the keyboard. Press these buttons at least 12 seconds.

Step 3

After 12 seconds, you need to release all these buttons and press the Power button to turn it On, and then check whether the issue should be fixed.

Procedure 7 – Restart the Mac with the Specific Buttons

You need to restart the Mac system with the specific buttons. Follow the steps here under:

Step 1

At first, you need to press the Power button to open the Shutdown page. Even if the system screen appears black, but still you can see it.

Step 2

After that, you have to press the S button to put your Mac device into Sleep mode. Next, you need to press the Power button for 5 seconds. Then, release it.

Step 3

Wait for the 10 seconds, and then again press the Power button to restart the system. And, then check whether the Mac system works or not.  

We hope, in this article, you will get all the solving process for the issue, Mac screen keeps going black. Carefully read these procedures and choose any one procedure which is suitable for your Mac device. After performing all the procedures, if the issue is still occurring, then there is a problem in the hardware. So, you need to replace it to get rid of this issue.